500 BBL_FRAC STORAGE TANK EPOXY LINED
GULF RENTAL SERIES
Features & Benefits
-
- Sahara units are built for tough duty
- Sahara provides customers with a variety of storage tanks solutions for different applications and capacities
- Tanks are lined with epoxy to provide resistance against corrosion from most drilling, completion fluids and well effluent.
- Optimized design for lower height and transportable on standard 45ft flatbed trailers (not necessarily required low bed trailer for transportation)
- All our storage tanks are designed in accordance with API12F guidelines and produced using high grade carbon steel plates, beams and pipes with excellent high-quality build to perform
- Internal and external ladders provided with tank
- All units are equipped with mechanical level indicator
- Technology meets efficiency
Description
| Design & Construction | |
|---|---|
| Designed & Manufactured | •Designed and build in accordance with API-12F guidelines •Hydro tested full tank level static at atmospheric pressure |
| Application | Drilling fluids, Completion fluids and Well Effluent OBM, WBM, SBM, Brine, Water, Diesel, Crude Oil and Corrosive fluids |
| Capacity | 500 BBL / 21,000 USG |
| Gun Line | Tank inside provided with gun lines with circulation nozzle |
| Volume | Zero dead volume |
| Tank Shape | Rectangular, V-Bottom, Flat walls from inside tank |
| Manway | 20-inch man way provided at front, on top and rear side bottom of tank for access and cleaning |
| Level Indicator | 2” Clear PVC pipe with 15 PSI pressure rating, fitted with on/off valve |
| Axle | Single axle, 11.34-ton capacity with brakes |
| Tires | Twin rims with radial tires 11R22.5 |
| King Pin | 5 th wheel king pin 2 inches |
| General Specification | |
| Nozzles: | • Fill /Circulation Gun Line: 1 x 4” tee manifold fitted with 4” butterfly valves and 4” hammer union F207 to loop various tanks. 1 x 4” nozzle with 4” butterfly valve and 4” hammer union F207 • Suction Line: 1 x 8” tee manifold fitted to sump with 8” butterfly valve and both ends 8” hammer union F207 to loop various tanks. 2 x 4” nozzle fitted with 4” butterfly valve and 4” hammer union F207. • Drain Line: 1 x 4” nozzle fitted with 4” butterfly valve and 4” hammer union F207. • Vent Line: 1 x 3” at back of tank fitted with 3” NPT Nipple with Cap |
| Finish | |
| Internal Lining: | Guard epoxy coal tar, high build suitable for application of hot water, brine, crude oil, diesel fuel & other chemicals as per the chemical resistance guide |
| Exterior Finish: | 3 coat marine epoxy primer and polyurethane top exterior coating. |
| Restriction | |
| Empty Lift Only | Tanks must be lifted ONLY EMPTY |
| TECHNICAL DATA | DETAILS | SSTFRAC_500BBL |
| Test Pressure | PSI | Atmospheric |
| Tank Capacity | BBL | 500 |
| Skid Dimension | L x W x H mm | 13900 x 2600 x 2960 |
| Weight Skid | kgs | 12750 |
Be the first to review “500 BBL_FRAC STORAGE TANK EPOXY LINED”
Reviews
There are no reviews yet.