DNV_ASME_500 CYLINDRICAL STORAGE TANK
GULF RENTAL SERIES
Features & Benefits
-
- Sahara units are built for tough duty
- Sahara provides customers with a variety of storage tanks solutions for different applications and capacities
- Tanks are lined with epoxy to provide resistance against corrosion from most drilling, completion fluids and well effluent
- Optimized design for lower height and transportable on standard 45ft flatbed trailers (not necessarily required low bed trailer for transportation)
- All our storage tanks are designed in accordance with API12F guidelines and produced using high grade carbon steel plates, beams and pipes with excellent high-quality
build to perform - Internal and external ladders provided with tank
- All units are equipped with mechanical level indicator
- Technology meets efficiency
Description
| Design & Construction | |
|---|---|
| Designed & Manufactured | •Designed and build in accordance with DNV2.7-3, ASME BPVC SECTION VIII-1 & API-12F guidelines •Proof load tested as per offshore lifting standard 2.5times of MGW |
| Application | Drilling fluids, Completion fluids and Well Effluent. OBM, WBM, SBM, Brine, Water, Diesel, Crude Oil and Corrosive fluids |
| Capacity | 500 BBL / 21,000 USG |
| Gun Line | Tank inside provided with gun lines with circulation nozzle |
| Lifting Points | Forklift pockets integrated into base, front & back trunnions and 4 lifting pad eyes to top |
| Lifting & Handling | Lifting Set supplied with DNV type lifting sling set with bow shackles nut and bolt type, sling Angle: 45° Max |
| Tank Shape | Cylindrical with twin baffle and dish heads |
| Manway | 20-inch man way provided on top and rear bottom of tank for access and cleaning |
| Safety Valve | Set Pressure 15 psi and Set Vacuum 06.2”hg |
| Level Indicator | 2” Clear PVC pipe with 15 PSI pressure rating, fitted with on/off valve |
| Tag Lines: | Tag lines and tie downs provided on both sides of base skid |
| General Specification | |
| Nozzles: | Fill Line: 1 x 3” tee manifold fitted with 3” ball valves and 3” hammer union F602 to loop various tanks. 1 x 4” nozzle fitted with 4” ball valve and 4” hammer union F207. Suction Line: 1 x 3” tee manifold fitted to sump with 3” ball valve and 3” hammer union F602 to loop various tanks. 1 x 4” nozzle fitted with 4” ball valve and 4” hammer union F207. Drain Line: 1 x 3” nozzle fitted with 3” ball valve and 3” hammer union F207. Circulation Gun Line: 1 x 4” nozzle fitted with 4” ball valve and 4” hammer union F207. Vent Line: 2 x 3” nozzle at back of tank fitted with 3” hammer union F207 and 3” NPT Nipple with Cap. |
| Finish | |
| Internal Lining: | Hempel 85671 Hempadur tank guard, high build suitable for application of hot water, brine, crude oil with dissolved H2S, diesel fuel & other chemicals as per the chemical resistance guide |
| Finish | |
| Exterior Finish: | 3 coat marine epoxy primer and polyurethane top exterior coating. |
| Restriction | |
| Empty Lift Only | Tanks must be lifted ONLY EMPTY |
| TECHNICAL DATA | DETAILS | SSTCYL_DNV500BBL |
| Test Pressure | PSI | 56 |
| Tank Capacity | BBL | 500 |
| Skid Dimension | L x W x H mm | 12725 x 3200 x 3695 |
| Weight Skid | kgs | 14000 |
Be the first to review “DNV_ASME_500 CYLINDRICAL STORAGE TANK”
Reviews
There are no reviews yet.