ELECTRIC SLUDGE & SLURRY SUBMERSIBLE PUMPS
GULF RENTAL SERIES_SAFE AREA
Features & Benefits
- Sahara units are built for tough duty
- All our electric centrifugal pumps are produced using international brand motors, pumps and starters with excellent high-quality build to perform
- Submersible SSLD Series Pumps comes in 5 models (3” to 6”) covers flow range up to 272 m³/hr and head up to 32 meters
- Handles various solid laden fluids, sludge & slurries
- All units are equipped with standard DOL
- All electrical items are safe area classification and dual class winding IP68
- Optimized design for less footprint, with maximum submergence up to 15m deep.
- Pump has double silicon carbide mechanical seals with in oil bath chamber
- Technology meets efficiency
Description
| Offshore Skid Specification | |
|---|---|
| Designed & Manufactured | Designed and BUILD TOUGH to operate in harsh environments Submersible sludge / slurry pumps are designed to perform different applications The SSLD pump has been designed to efficiently pump contaminated fluids containing solids in suspension to a maximum of 70% by weight. Windings are class H insulation rated to 200°C and incorporate overheating and overload protection Top discharge, self-venting design means no more airlock. Jacket design ensures motor is always cooled even when pumping within inches of the bottom. Replaceable stainless steel shaft sleeve to protect the shaft |
| Lifting & Handling | Centrally located single point lifting pad eye on top |
| Tag Lines: | Tag lines and tie downs provided on both sides of lifting frame |
| General Specification | |
| Electrical Power Input | All pumps are designed to work with 3 phase, 4 pole motor, dual frequency 380 to 460V, 50Hz and 60Hz |
| Slurry Pump | • SSLD series sludge / slurry handling submersible pump ductile iron hardened casing heavy duty construction, equipped with a high chromium cast iron agitator which creates inherent mixing causing the solids suspension to smooth suction of the settled slurry/sludge and prevents clogging of inlet • Pump other wear parts and impeller are made of high chromium cast iron for extra durability • Suitable for large mining, construction, dewatering, dredging, municipal, wastewater, agriculture, slurry, oilfield & various applications • Application: sewage, barge/tank cleanout, drilling site cutting waste pit clean out, wash down sumps, coal run off sumps, lime slurries, silt removal, mill scales and sand gravel pumping |
| Electrical Power Supply Cable | Power supply H07RNF cable 25m long provided with all pumps, one end permanently connected into starter panel and other end supplied loose ends to connect with generator or rig supply source Marine armored cable upon separate request |
| Finish | |
| Exterior Finish: | 3 coat marine epoxy primer and polyurethane top exterior coating. |
| TECHNICAL DATA | DETAILS | SEP80-SSLD | SEP100-SSLD | SEP100-SSLD | SEP150-SSLD | SEP150-SSLD |
| Inlet/Outlet | Inches | 80×100 | 100×100 | 100×100 | 150X150 | 150X150 |
| Max.Head | Ft/m | 46/14 | 55/17 | 62/19 | 72/22 | 104/32 |
| Pressure | Bar | 1.37 | 1.66 | 1.86 | 2.15 | 3.14 |
| Max.Flow | m³/hr./GPM | 90/396 | 115/506 | 132/581 | 272/1197 | 184/810 |
| Max.Solid | mm | 22 | 22 | 22 | 38 | 38 |
| Impeller | Type | Semi-open | Semi-open | Semi-open | Semi-open | Semi-open |
| Voltage | V | 400-460 | 400-460 | 400-460 | 400-460 | 400-460 |
| No. Frequency | Hz | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
| Frequency |
HP/KW | 5/3.7 | 7.5/5.5 | 10/7.5 | 15/11 | 20/15 |
| Starter | Type | DOL | DOL | DOL | DOL | DOL |
| Dimension | LxWxH | 413x361x843 | 440x410x849 | 442x413x881 | 542x472x1048 | 551x512x1075 |
| Weight | Tare-kgs | 110 | 120 | 130 | 240 | 265 |
Be the first to review “ELECTRIC SLUDGE & SLURRY SUBMERSIBLE PUMPS”
Reviews
There are no reviews yet.