OFFSHORE 500 BBL 2X30HP HOPPER CENTRIFUGAL PUMP
GULF RENTAL SERIES
Features & Benefits
-
- Sahara units are built for tough duty
- Sahara provides customers with a variety of storage & mixing tanks solutions for different applications and capacities.
- Tanks are lined with epoxy to provide resistance against corrosion from most drilling, completion fluids and well effluent.
- All our storage mixing tanks are designed in accordance with API-12F guidelines and produced using high grade carbon steel plates, beams and pipes with excellent highquality build to perform /li>
- Internal and external ladders provided with tank Tag lines and tie downs provided on both sides of skid All units are equipped with mechanical level indicator 20-inch man way provided at rear bottom of tank for access and cleaning
- Full length top mounted grating walkway with integrated collapsible handrails
- Tank inside provided with gun lines with circulation nozzle Technology meets efficiency
15 People are viewing right now
Description
| Design & Construction | |
|---|---|
| Designed & Manufactured | •Designed and build in accordance with DNV2.7-3, & API-12F guidelines •Proof load tested as per offshore lifting standard 2.5times of MGW |
| Application | Suitable for use in operations of Drilling / Mud Plant and Storage of Crude Oil, Brine, Water, other Production Fluids and Mixing of OBM/WBM/SBM up to 20 PPG, Capacity 500 bbl. |
| Construction | High carbon steel tubing frame and steel plates side walls and floor 8mm thick Tank has 1 Compartment 500 BBL with manifolds and valves to connect tank, pump and hopper |
| Lifting & Handling | Lifting Set supplied with DNV type lifting sling set with bow shackles nut and bolt type, sling Angle: 45° Max |
| Mixing Agitator: | Two (2) 25hp@50Hz, 30hp@60Hz individually controlled explosion proof motors with canted blade 36” and 44” paddle impellers, wired to an explosion proof IP66 electrical DOL starter panel Main Supply cable 50m long 4Cx25mm² and supply power 380-460V and 50/60 Hz |
| Electric Centrifugal Pump | Integrated with 120HP Exd electric motor driven tigerflo advance vacuum prime centrifugal pump.Explosion proof IP66 electrical soft starter panel, supply cable 50m and supply power 380-460V and 50/60 Hz |
| Mixing Hopper: | The shear-mixer hopper high-performance venturi eductor system designed for slurry mixing, brine mixing and other drilling fluids with Inlet 4” and discharge 4” |
| General Specification | |
| Nozzles: | Discharge Manifold: – 4” discharge line direct into tank, one 4” through hopper direct into tank and two auxiliary outlets fitted w/4” butterfly valve & 150lb flanged adaptor w/4” union & cap F207 Fill Line Manifold: – One 4” fill line direct to tank and one 4” through hooper, both fitted w/4” butterfly valve & 150lb flanged adaptor w/4” union & cap F207 Suction Manifold: – One 8” suction line connected with tank Inside elbow to bottom floor sump and one w/4” union F207 and at front with reducer 8”x4” or 8”x6”, both fitted 8” butterfly valve & 150lb flanged adaptor. Drain Lines: – One 4” bottom sump of tank, fitted w/4” butterfly valve & 150lb flanged w/4” union & cap F207 Circulation/Jetting Line: – 4” discharge manifold has 4” jetting line fitted w/4” ball valve & 150lb flanged adaptor w/4” union & cap F207 |
| Finish | |
| Internal Lining: | Lined with High build Coal Tar Epoxy, Suitable for application of hot water, brine, OBM, SBB, WBM, crude oil, diesel fuel & other chemicals as per the chemical resistance guide |
| Finish | |
| Exterior Finish: | 3 coat marine epoxy primer and polyurethane top exterior coating. |
| Restriction | |
| Empty Lift Only | Tanks must be lifted ONLY EMPTY |
| TECHNICAL DATA | DETAILS | SSTCYL_DNV500BBL |
| Tank Capacity | BBL | 500 |
| Skid Dimension | LxWxH mm | 12000 x 3000 x 3840 |
| Weight Skid | kgs | 18,500 |
Be the first to review “OFFSHORE 500 BBL 2X30HP HOPPER CENTRIFUGAL PUMP”
Reviews
There are no reviews yet.