OFFSHORE 500 BBL TWO COMPARTMENT, 3X18HP HOPPER
GULF RENTAL SERIES
Features & Benefits
-
- Sahara units are built for tough duty
- Sahara provides customers with a variety of storage & mixing tanks solutions for different applications and capacities.
- Tanks are lined with epoxy to provide resistance against corrosion from most drilling, completion fluids and well effluent.
- All our storage mixing tanks are designed in accordance with API-12F guidelines and produced using high grade carbon steel plates, beams and pipes with excellent highquality build to perform
- Internal and external ladders provided with tankTag lines and tie downs provided on both sides of skidAll units are equipped with mechanical level indicator 20-inch man way provided at rear bottom of tank for access and cleaning
- Full length top mounted grating walkway with integrated collapsible handrails
- Tank inside provided with gun lines with circulation nozzle Technology meets efficiency
15 People are viewing right now
Description
| Design & Construction | |
|---|---|
| Designed & Manufactured | •Designed and build in accordance with DNV2.7-1, & API-12F guidelines •Proof load tested as per offshore lifting standard 2.5times of MGW |
| Application | Suitable for use in operations of Drilling / Mud Plant and Storage of Crude Oil, Brine, Water, other Production Fluids and Mixing of OBM/WBM/SBM up to 20 PPG, Capacity 500 bbl. |
| Construction | High carbon steel tubing frame and steel plates side walls and floor 8mm thick Tank has 2 Compartment (300 bbl and 200 bbl) with manifolds and valves to connect either of tank |
| Lifting & Handling | Lifting Set supplied with DNV type lifting sling set with bow shackles nut and bolt type, sling Angle: 45° Max |
| Mixing Agitator: | Three (3) 15hp@50Hz, 18hp@60Hz individually controlled explosion proof motors with canted blade 36” paddle impellers, wired to an explosion proof IP66 electrical panel Main Supply cable 50-meter long 4Cx16mm². Supply Power 380-460V and 50/60 Hz |
| Mixing Hopper | The shear-mixer hopper high-performance venturi eductor system designed for slurry mixing, brine mixing and other drilling fluids with Inlet 4” and discharge 4” |
| General Specification | |
| Nozzles: | Discharge Manifold: Fill Lines: – One 6” manifold with 4” fill pipe to roof with discharge to hooper, barite injector and discharge to either of tank, fitted w/4” butterfly valve & 150lb flanged adaptor w/4” union & cap F207 Suction Manifold: – One 8” manifold with Inside elbows to bottom floor sump of both tanks Manifold fitted w/8” butterfly valve, two ends w/8” union F207 and at front 2 x 4” butterfly valve with flange adaptor 4” F207 and 4” F206 union Drain Lines: – Two 4” bottom sump of each tank, fitted w/4” butterfly valve & 150lb flanged w/4” union & cap F207 Vents / Overflow: – One 4” at rear fitted w/150lb flanged adaptor Circulation/Jetting Line: – 6” discharge manifold has two 4” jetting lines fitted w/4” ball valve & 150lb flanged adaptor w/4” union & cap F207 for each tank |
| Finish | |
| Internal Lining: | Lined with High build Coal Tar Epoxy, Suitable for application of hot water, brine, OBM, SBB, WBM, crude oil, diesel fuel & other chemicals as per the chemical resistance guide |
| Finish | |
| Exterior Finish: | 3 coat marine epoxy primer and polyurethane top exterior coating. |
| Restriction | |
| Empty Lift Only | Tanks must be lifted ONLY EMPTY |
| TECHNICAL DATA | DETAILS | SOMT500BBLX18 |
| Tank Capacity | BBL | 500 |
| Skid Dimension | LxWxH mm | 13700x3000x2850 |
| Weight Skid | kgs | 14,500 |
Be the first to review “OFFSHORE 500 BBL TWO COMPARTMENT, 3X18HP HOPPER”
Reviews
There are no reviews yet.